Quick Tip: Linear Pattern-Up to Reference

EmailFacebookLinkedInTwitterShare

In SOLIDWORKS 2015, Up to reference was added as an option in Linear Patterns.  Typically you set the distance between the instances and the number of instances.  Now you can specify the distance up to some piece of geometry allowing the software to figure out either the distance or instance count. You still choose an edge for the pattern direction.  You now choose Up to reference and something to reference to.  You are building a much more intelligent model while […]

Read More

Quick Tip: Linear Pattern-Up to Reference

EmailFacebookLinkedInTwitterShare

In SOLIDWORKS 2015, Up to reference was added as an option in Linear Patterns.  Typically you set the distance between the instances and the number of instances.  Now you can specify the distance up to some piece of geometry allowing the software to figure out either the distance or instance count. You still choose an edge for the pattern direction.  You now choose Up to reference and something to reference to.  You are building a much more intelligent model while […]

Read More

Nominal Wall Thickness Inside Plastics Simulation

EmailFacebookLinkedInTwitterShare

Wall Thickness – a major concern when designing a plastic part. During the injection of the mold the melted plastic flow front will always move in the direction of least resistance. You can think of this similar to water flowing through a pipe.  The larger the pipe the easier the volume of water will flow.  If the wall is too thick in comparison to other sections of the part the plastic flow will “Race Track” or move ahead of the […]

Read More

What is the Vary Sketch Option in a Pattern?

EmailFacebookLinkedInTwitterShare

I have an option that you might have overlooked or just didn’t know what it does.  It’s the Vary Sketch option. The definition from the Help File says, “Select the Vary Sketch option to let the pattern instances change dimensions as they repeat.”  Let’s take a look at what you have to do and how it might help you. So what I’m going to do is create a triangular part first. Now we need to have a feature added to […]

Read More

What is the Vary Sketch Option in a Pattern?

EmailFacebookLinkedInTwitterShare

I have an option that you might have overlooked or just didn’t know what it does.  It’s the Vary Sketch option. The definition from the Help File says, “Select the Vary Sketch option to let the pattern instances change dimensions as they repeat.”  Let’s take a look at what you have to do and how it might help you. So what I’m going to do is create a triangular part first. Now we need to have a feature added to […]

Read More

ABS Snap Fit Non-Linear Static Study

EmailFacebookLinkedInTwitterShare

I recently acquired a dehumidifying rod from a family member and it was missing the mounting components.  After looking everywhere in my family members basement we could not locate the missing items.  So what is some one who has access to SOLIDWORKS and a 3D Printer to do?  That’s right lets make our own. A dehumidifying rod is an electric heater that facilitates natural convection in enclosed areas like safes, vehicles, small rooms etc.  The first place to start is […]

Read More

ABS Snap Fit Non-Linear Static Study

EmailFacebookLinkedInTwitterShare

I recently acquired a dehumidifying rod from a family member and it was missing the mounting components.  After looking everywhere in my family members basement we could not locate the missing items.  So what is some one who has access to SOLIDWORKS and a 3D Printer to do?  That’s right lets make our own. A dehumidifying rod is an electric heater that facilitates natural convection in enclosed areas like safes, vehicles, small rooms etc.  The first place to start is […]

Read More

Pack and Go Now Available for Flow Results

EmailFacebookLinkedInTwitterShare

Pack and Go Now Available in SOLIDWORKS Flow Simulation Pack and Go has been a staple in SolidWorks functionality for years. It allows a SOLIDWORKS user to package SOLIDWORKS  files such as Assemblies, Parts, and Drawings into a new folder location, or a Zipped file.  Pack and Go can keep the current file structure of folders and sub folders, or flatten to one folder.  This allows a user to make back ups of their work, or transfer files to others […]

Read More

Pack and Go Now Available for Flow Results

EmailFacebookLinkedInTwitterShare

Pack and Go Now Available in SOLIDWORKS Flow Simulation Pack and Go has been a staple in SolidWorks functionality for years. It allows a SOLIDWORKS user to package SOLIDWORKS  files such as Assemblies, Parts, and Drawings into a new folder location, or a Zipped file.  Pack and Go can keep the current file structure of folders and sub folders, or flatten to one folder.  This allows a user to make back ups of their work, or transfer files to others […]

Read More

3D ContentCentral: Get Those Models for Free

EmailFacebookLinkedInTwitterShare

Most companies I work with use purchased components and want to add them into their assemblies.  So how do you get the solid models?  You might contact the company for the model or just model it yourself.  Well you could download the models for free without contacting anyone by using 3DContent Central. 3D ContentCentral (3DCC) is a free service for users to download solid models.  How is this different than other similar sites?  This is a Dassault Systemes site and […]

Read More