My Stratasys Desktop 3D Printer Is Not Jetting Material – Stratasys 3D Printer Support Tip

EmailFacebookLinkedInTwitterShare

From time to time we have seen 3D Printers “Ghost Printing” as we call it.  This is when the print block moves as normal during a print job without jetting any material.  This is caused by print data getting corrupted. There is a simple fix for this. Here is the process. First, power down the printer. Next, take the black cover off the print block using the two silver thumb screws.   Finally, you will see two ribbon cables leading to the two green […]

Read More

Stratasys F123 Series Tip Wipe Assemblies

EmailFacebookLinkedInTwitterShare

It is important to keep the tip wipe assemblies in your Stratasys F Series printer working properly. If the tip wipe assemblies are not cleaning the tips properly, bad print results can occur. The tip wipe assemblies should be checked and cleaned on a monthly basis or anytime you are having print quality issues that may be related to a print head. You should also check the tip wipe assembly any time you notice that material stays stuck to the […]

Read More

My Stratasys Desktop 3D Printer Is Not Jetting Material – Stratasys 3D Printer Support Tip

EmailFacebookLinkedInTwitterShare

From time to time we have seen 3D Printers “Ghost Printing” as we call it.  This is when the print block moves as normal during a print job without jetting any material.  This is caused by print data getting corrupted. There is a simple fix for this. Here is the process. 1. Power down the printer. 2.Then, take the black cover off the print block using the two silver thumb screws.   3. You will see two ribbon cables leading to […]

Read More