Stratasys 3D Printing: FDM Printer Head Jams – A Simple Solution

EmailFacebookLinkedInTwitterShare

FDM Printer Head Jams – A Simple Solution If your FDM head is frequently jamming there may be a simple solution. This can only be done on the Stratasys uPrint, Dimension 1200 and Fortus 250mc systems. Over time, the Z axis will become uncalibrated.  This can happen by itself over time or be caused by reusing build trays.  The Solution is to run a Z calibration.  This will insure that the tips are printing at the proper height away from […]

Read More

X, Y, & Z Calibration for your Uprint, 1200, and Fortus 250mc Printers

EmailFacebookLinkedInTwitterShare

On your FDM system you can run a number of different materials and/or colors through it. Over time the tips deteriorate and need replacing. Some colors such as blue and orange tend to leave trails of the material in the tip as well that can come out even after purging and will be embedded into your other color parts. For instances like this we recommend keeping spare tips for these colors so they don’t ruin a part after you do […]

Read More