Eliminate the Static with ABS-ESD7.
3D Print With Durable, Static-Dissipative Material
ABS-ESD7 now offers FDM strength and static-dissipation on the F370 3D Printing System. Electronics manufacturers can expand the use of 3D printing onto the assembly line with this durable material that works with soluble support removal, enabling complex parts with no extra effort.
- Tensile Strength: 36 MPa (XZ Axis)
- Tensile Modulus: 2,400 MPa (XZ Axis)
- HDT @66 PSI: 96°C
- Coefficient of Thermal Expansion: 8.825 mm/mm/°C
Antero 840CN03 – Customized to Perform.
Meet the most critical design requirements.
Antero™ 840CN03 is a PEKK-based FDM thermoplastic combining the excellent physical and mechanical qualities of PEKK with electrostatic dissipative (ESD) properties. The material is filled 3% by weight with carbon nanotubes.
As a high-performance polymer, Antero 840CN03 exhibits exceptional chemical and wear resistance, ultra-low outgassing properties and consistent ESD performance. ESD values range from 104 – 109 ohms per square inch. This makes the material particularly suitable for space and industrial applications where these qualities are critical.
Build Tougher Tools with Diran 410MF07
Upgrade to tough, low-friction tooling.
Diran™ 410MF07 is a nylon-based thermoplastic FDM® material, mineral-filled 7% by weight. It demonstrates very good toughness and impact strength combined with resistance to hydrocarbon-based chemicals. Its smooth, lubricious surface quality offers low sliding resistance.
Typical applications include jigs, fixtures and other forms of general manufacturing tooling, and is particularly effective for applications needing a non-marring interface between the tool and the workpiece.