Use patient-specific 3D printed medical models for pre-surgical planning to help improve patient outcomes, patient understanding and consent.
Stratasys Healthcare 3D Printer
J5 MediJet
The all-in-one medical printer.
With multi-material, multicolor and biocompatible capabilities in a single print tray, MediJet™ sets a new standard for medical modeling.
Applications
Pre-Surgical Planning
Training & Education
Print exact pathology on-demand and train physicians, students and medical device field staff anywhere.
Surgical Guides & Tooling
Create drilling and cutting guides* that are sterilizable and biocompatible.
*With approved 3rd party 510k cleared segmentation software.
Medical Device Development
Enable clinically relevant benchtop testing and create consistency by 3D printing exact anatomy to use when testing medical devices.
Printing Materials
- Biocompatible (MED610)
- Biocompatible Opaque (MED615RGD™ IV)
- Vero
- DraftWhite (MED857)
- Elastico Clear (FLX934)
- View PolyJet 3D Printing Materials
J5 MediJet Features
-
System Size
651 x 661 x 1511mm (25.63 x 26.02 x 59.49 in.)
-
System Weight
228 kg (503 lbs.)
-
Build Modes
High Quality Speed (HQS) – 18.75μm
-
Rotating Print Tray
Radial 3D Printing paths for faster prints, better quality
-
Build Envelope (XYZ)
Printing area: 1,174cm2
Max Part Size: Up to 140 x 200 x 190mm (5.51 x 7.87 x 7.48 in.)
Full Specifications | |
---|---|
Model Materials |
Biocompatible materials: Biocompatible rigid transparent (MED610) Vibrant colors including: VeroCyan™V |
Supported Sterilization Processes |
Steam (4 minutes at 132 °C), Gamma (25 – 50 kGy), EtO (specifications available upon request) |
Digital Model Materials |
Unlimited number of composite materials including over 500,000 colors |
Support Materials |
SUP710™ (Water Jet removable) |
Build Tray |
Printing area: 1,174cm2 Max Part Size: Up to 140 x 200 x 190mm (5.51 x 7.87 x 7.48 in.) |
Layer Thickness |
Horizontal build layers down to 18 microns (0.0007 in.) |
Accuracy |
Deviation from STL dimensions with rigid materials,based on size: under 100 mm – ±150μ; above 100 mm – ±0.15% of part length.* * true for 67% (1 sigma) models printed for future information can be found in the spec sheet |
Workstation Compatibility |
Windows 10 |
Network Connectivity |
LAN — TCP/IP |
System Size and Weight |
651 x 661 x 1511mm (25.63 x 26.02 x 59.49 in.); 228 kg (503 lbs.) |
Operating Conditions |
Temperature 18 – 25 °C (64 – 77 °F); relative humidity 30 – 70% (non-condensing) |
Power Requirements |
100 – 240 VAC, 50 – 60 HZ, 10A, 1 phase |
Regulatory Compliance |
CE, FCC, EAC |
Software |
GrabCAD Print |
Build Modes |
High Quality Speed (HQS) – 18.75μm |
View More |
The economical, compact, all-in-one medical modeling printer.
The all-in-one medical printer.
With multi-material, multicolor and biocompatible capabilities in a single print tray, MediJet™ sets a new standard for medical modeling.
Improved point-of-care planning
The use of patient-specific 3D printed medical models for pre-surgical planning improves patient outcomes by reducing complications, decreasing operation time and length of hospital stays. Patient understanding, consent and satisfaction have also been shown to improve with the use of 3D medical models.
Enhanced training & education programs
Print patient-specific models on demand for education programs. Scale up product demonstrations when training field staff and physicians on a new medical device.
Efficient medical device development
Create consistency in testing to enhance product quality, reduce costs and accelerate time to market.
Do You Have a a 3D Printing & Additive Manufacturing Success Plan?
Stratasys Support
The ability to support our customers is the cornerstone of our business. Our engineers are available 12 hours per day, 5 days per week, our award-winning technical team can assist you with your 3D Printing and Additive Manufacturing challenges in a timely manner.
Call: 888-285-2284
Email: 3dp.support@cati.com
Support Hours: 7AM – 7PM Central Time
Support Days: Monday – Friday
3D Printing Services
Are your 3D Printing machines all in-use? Do you need a material or technology you don’t currently have in-house? No matter your situation, the team at Computer Aided Technology can get you back on track to meet your deadline by providing you with 3D printed part services.
We can provide you with project support on a vast number of technologies including: FDM, SLS, DLP, CLIP, MultiJet Fusion, PolyJet, Stereolithography, 3D Printed Metals, CNC Machining, Injection Molding, Urethane Cast Molding
CATI Is Your 3D Printing and Additive Manufacturing Success Plan
As the Nation’s leading Stratasys partner, no one is more qualified to build and support your product development process. We believe everyone should have access to our curated portfolio of transformative engineering and manufacturing technologies.
By listening to and working with you, we will find the right solution for you at the right time, with an implementation and growth plan to support your business ambitions.
Get Started with Stratasys Solutions from CATI.
We’re ready to help figure out the right product development solution plan for you. Contact us today to get started with a quote, a free trial, a demo, or just ask questions.