Stratasys F123 Series 3D Printers

Performance so good, you won’t believe it’s so easy to use!

Stratasys F170 / F270 / F370

Performance so good, you won’t believe it’s so easy to use!

The Stratasys F123 3D Printer Series demands less knowledge and experience, while meeting even the most advanced rapid prototyping expectations and needs. This Series excels at all stages of the design prototyping process, from draft-concept iterations – to complex design verification – to high-quality functional prototypes. Enhanced 3D printing capabilities include – a new user interface, remote print monitoring, built-in camera, auto calibration, an improved software experience with GrabCAD Print, easy material change out and auto material changeover – help make the Stratasys F123 3D Printer Series one of the most simple to use, yet powerful 3D printing platforms for busy classrooms and demanding business environments alike.

F123 Series Case Study - Dunwoody College
F123 Series Case Study - Center for Advanced Design

F123 Series Videos

Stratasys F123 Series Specs:

F123 Series Brochure F123 Series White Paper

Size and Weight

1626 x 864 x 711 mm (64 x 34 x 28 in.)
227 kg (500 lbs)

Build Size

254 x 254 x 254 mm
(10 x 10 x 10 in.)

Model Materials

PLA1, ABS-M30™, ASA, QSR support material

Layer Thickness

0.005 in. (0.127 mm) – 0.013 in. (0.330 mm)

F170

View F270 View F370

Accuracy

+/- .200 mm (.008 in), or +/- .002 mm/mm (.002 in/in)

Material Delivery Options

2 material spool bays (1 for model, 1 for support)

Software

GrabCAD Print

Full Side-by-Side Technical Specifications Below

Download F170 Brochure

Smarter and Easier Prototyping

The new Stratasys F123 Series is easy to operate and maintain for all levels of experience. And, it’s adept at every prototyping stage, from concept verification to design validation to functional performance.
The most commonly used CAD file formats can be imported directly into GrabCAD. The three printers in the platform, the Stratasys F170, F270 and Stratasys F370, support a broad range of capabilities and budgets for every stage of prototyping.

Minimal setup means you can simply plug and play to give your entire office access to professional 3D printing.

Auto-calibration ensures you spend less time troubleshooting and more time prototyping.

Fast and easy material swaps help maximize your design team’s productivity.

Versatility and Performance

The Stratasys F123 Series lets you print everything from fast, low-cost concept models to durable assemblies. And the Stratasys F123 Series gives the option of up to four different materials, along with our easy-to-remove soluble support material.^* Create complex parts and assemblies with no compromise on accuracy, detail and repeatability. Even for your earliest design iterations, you can expect Stratasys quality and dependability.

^*The Stratasys F170 and F270 models support PLA, ABS-M30 and ASA materials; the Stratasys F370 supports PLA, ABS-M30, ASA and PC-ABS materials. PLA uses breakaway support only.

Smarter Software

GrabCAD Print software simplifies the entire 3D printing process with an intuitive CAD-like application anyone on your team can use. Features like detailed reporting and remote monitoring help you easily manage your print jobs from outside the office. Combined with the ability to seamlessly share projects between users, it all adds up to a more streamlined, efficient workflow.

Product Specifications

System Size and Weight

1626 x 864 x 711 mm (64 x 34 x 28 in.) 227 kg (500 lbs) with consumables

Noise Specification

46 dB maximum during build, 35 dB when idle

Model Capabilities

	Stratasys F170	Stratasys F270	Stratasys F370
Maximum Build Size (XYZ)	254 x 254 x 254 mm (10 x 10 x 10 in.)	305 x 254 x 305 mm (12 x 10 x 12 in.)	355 x 254 x 355 mm (14 x 10 x 14 in.)
Model Materials	PLA¹, ABS-M30™, ASA, QSR support material	PLA¹, ABS-M30, ASA, QSR support material	PLA¹, ABS-M30, ASA, PC-ABS, QSR support material

Layer Thickness

	0.013 in. (0.330 mm)	0.010 in. (0.254 mm)	0.007 in. (0.178 mm)	0.005 in. (0.127 mm)
PLA		X
ABS	X	X	X	X
ASA	X	X	X	X
PC-ABS	X	X	X	X

Accuracy²

Parts are produced within an accuracy of +/- .200 mm (.008 in), or +/- .002 mm/mm (.002 in/in), whichever is greater.

Material Delivery Options

Stratasys F170 = 2 material spool bays, 1 for model, 1 for support located in a drawer on the front of the unit
Stratasys F270/F370 = 4 material spool bays, 2 for model, 2 for support located in a drawer on the front of the unit

Network Connectivity

Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless: IEEE 802.11n, g, or b; Authentication: WPA2-PSK, 802.1x EAP; Encryption: CCMP, TKIP

Software

GrabCAD Print (download): Stratasys F170, F270 and F370
Insight software license: Stratasys F370 only

System Requirements

Windows 7, 8, 8.1 and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)

Operating Environment

Operating: Temperature: 59-86ºF (15-30ºC), Humidity: 30-70% RH
Storage: Temperature: 32-95ºF (0-35ºC), Humidity: 20-90% RH

Power Requirements

100–132V/15A or 200–240V/7A. 50/60 Hz

Regulatory Compliance

CE, FCC, EAC, EMC (low-voltage directive), TUV, FCC, RC, RCM, RoHs, WEEE, Reach

¹ PLA does not utilize soluble support material. The supports are made of breakaway PLA.
² Accuracy is geometry-dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield. Z part accuracy includes an additional tolerance
of -0.000/+slice height.

Explore Other 3D Printers From Stratasys:

3D Printing Customer Stories

Customer Story: Frasca

Nobody said learning to fly was easy. Sure, birds, athletes, and superheroes make it look simple, but in reality, you have to take baby steps before you can really fly. […]

Read Customer Story

Customer Story: Boss Display

Producing quality interactive exhibits all over the United States and many cities abroad, Boss Display is a full-service firm with a 26,000-square-foot production facility located in Columbus, OH. They design […]

Read Customer Story

Customer Story: Lynx Motorsports

Lynx Motorsports is a student engineering team from University of Colorado Denver that designs and races Formula race cars as a part of Formula SAE (Society of Automotive Engineers). Each […]

Read Customer Story

Superior Graphite Customer Story

If you’ve been in business for over a century like Superior Graphite, you might have seen a few CAD programs come and go. As a chemicals manufacturing company, Superior […]

Read Customer Story