Objet260 Connex2

Legacy 3D Printer

Contact Us

Request A Demo

Request A Quote

Objet260 Connex2 – Precise, Multi-Material 3D PrintingObjet 260 Connex2


The Objet260 Connex2 3D printer puts the power and possibility of triple-jetting technology in a footprint that fits your office environment. With 120 materials to choose from, you can turn your 3D designs into impressive, high-precision prototypes.

Triple-Jetting Technology

Objet 260 Connex2Using triple-jetting technology, the Objet260 Connex2 creates stunning prototypes that closely resemble finished products. Combine as many as 27 material properties a single part, and eliminate time-consuming assembly.

Like all Connex 3D printers, the Connex2 offers outstanding 16-micron layer resolution for printing complex geometries, smooth surfaces and thin walls. And like all 3D printers on the triple-jetting platform, you can replace an empty cartridge without interrupting your print job.

For higher volumes or bigger parts, larger Connex2 systems are available in our Production Series.

120 Materials

By combining two materials in specific concentrations and microstructures, you can produce dozens of Digital Materials with varying translucency, pliability and thermal resistance. Up to 27 materials can appear in one prototype with no assembly, or in a selection of diverse models all built in one job.

Digital ABS:
With the Objet260 Connex2, you can build prototypes in strong, two-component Digital ABS and complete your design with a third base material, like TangoBlack for overmolding or Transparent material for light transmission.

Simulated Polypropylene:
Two tough single-material options withstand the stress of living hinges, flexible closures and snap-fit parts. Combine with High Temperature material for improved heat resistance.

High Temperature:
This heat-resistant material is ideal for thermal testing of static parts. Combine with Rubber material to achieve a range of Shore A values.

Medical rapid prototyping materials offer excellent detail visualization and great dimensional stability for dental delivery trays, surgical orthopedic guides and hearing aids.

With a range of opacities and elastomer characteristics, this adaptable material is ideal for modeling a wide variety of products from soft grip handles to footwear.

Objet260 Connex2 Printed Models

Objet260 Connex1

Objet260 Connex2 Specifications

Model materials:

  • Rigid Opaque (VeroWhitePlus, VeroBlackPlus, VeroGray and VeroBlue)
  • Rubber (Tango family)
  • Transparent (RGD720 and VeroClear)
  • Simulated Polypropylene (Endur and Durus)
  • Biocompatible (MED610)
  • High Temperature (RGD525)

Digital Materials:

  • Digital ABS and Digital ABS2
  • Wide range of translucencies
  • Rubber blends in a range of Shore A values
  • Simulated Polypropylene materials with improved heat resistance.

Support material: FullCure 705 non-toxic gel-like photopolymer support

Material cartridges: Eight sealed 3.6 Kg (7.9 lbs) cartridges. Three different model materials can be loaded simultaneously in the high-capacity material cabinet, and can be hot-swapped.

Net build size: 255 × 252 × 200 mm (10.0 x 9.9 x 7.9 in.)

Layer thickness: Horizontal build layers as fine as 16 microns (0.0006 in.)

Build resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi

Accuracy: 20-85 µm for features below 50 mm; up to 200 µm for full model size (for rigid materials only, depending on geometry, build parameters and model orientation)

Workstation compatibility: Windows 7 32/64-bit Network connectivity: LAN – TCP/IP Size and weight: 870 × 735 × 1200 mm (34.25 × 28.9 × 47.25 inches); 410 kg (902 lbs) Material Cabinet: 330 x 1170 x 640 mm (13 x 46.1 x 26.2 in.) 76 kg (168 lbs)

Power Requirements: 110–240 VAC 50/60 Hz; 1.5 KW single phase

Regulatory Compliance: CE, FCC

Operating Conditions: Temperature 18-25 °C (64-77 °F); relative humidity 30-70% (non-condensing)