Mojo

Professional 3D printer at an affordable price

MOJO 3D Printer

Introducing Mojo now at a lower price with the same choices, allowing you to print models fast– in color – while saving money by reducing the amount of materials needed. And, did we mention it’s all available now at the low cost of only $5,999? Mojo 3D Printer Print Pack (includes start-up supply kit, one year warranty, Mojo Print Wizard software, WaveWash 55 Support Cleaning System, and a case of 24 Ecoworks Tablets). Professional-quality models printed at your desk with document printing simplicity. It's possible with Mojo. Our lowest price, fastest build Idea Series 3D printer will inspire your endless creativity.

FDM technology allows you to build spot-on functional concept models and rapid prototypes.
Priced and sized to fit on your desk so you can build professional-quality models without leaving your chair.
Mojo Print Engine makes printing optimum-quality models a snap.

The affordable Mojo 3D Print Pack includes everything you need to start printing immediately.

Mojo 3D Printer
Print Wizard & Control Panel Software
WaveWash 55 Support Cleaning System
Start-up Kit, including:
- Starter QuickPack Print Engine of ivory ABS plus modeling material
- Starter QuickPack Print Engine of support material
- Ecoworks tablets
- Modeling bases and more

MOJO Video

Stratasys Mojo 3D Printer Specs:

Get the full MOJO Spec Sheet WaveWash Support Cleaning Spec Sheet

Size and Weight

63 x 45 x 53 cm (25 x 18 x 21 in)
27 kg (60 lbs)

Build Size

12.7 x 12.7 x 12.7 cm
(5 x 5 x 5 in)

Layer Thickness

.17 mm (.007 in)

Mojo

Model Material

P430 ABSplus in ivory, white, blue, fluorescent yellow, black, red, nectarine, olive green, gray

Power Requirements

100-127 VAC, 6A, 60 Hz
220-240 VAC, 2.5A, 50 Hz

Full Technical Specifications Below

Download uPrint SE Plus Brochure

Materials

Build your 3D printed parts with Mojo's QuickPack Print Engines. Snap the Print Engine in just as you would a home document printer and bring your ideas to life. With a fresh print head for every material change, you'll see optimum part quality with every print. And 80 cubic inches of material in each bag means fewer material changes and more uninterrupted printing.

Modeling bases provide a smooth foundation on which your models can grow. Take the recyclable base out of your 3D printer when printing is done and snap off your finished model.

WaveWash 55

Quickly remove support material from models' intricate parts and moving assemblies without tedious cleaning. That piece of Mojo magic is brought to you by WaveWash 55, our most compact and convenient support removal system. Pop your 3D printed piece off its modeling base and drop it into WaveWash 55, where a combination of the right temperature and agitation will simply dissolve the supports away. No plumbing required.

Model Material	P430 ABSplus in ivory, white, blue, fluorescent yellow, black, red, nectarine, olive green, gray
Support Material	SR-30 Soluble
Build Size	12.7 x 12.7 x 12.7 cm (5 x 5 x 5 in)
Layer Thickness	.17 mm (.007 in)
Workstation Compatibility	Windows® 7 and 8
Size and Weight	Mojo 3D Printer: 63 x 45 x 53 cm (25 x 18 x 21 in) 27 kg (60 lbs) WaveWash 55 Support Cleaning System: 33.5 x 33.5 x 33.5 cm (13.2 x 13.2 x 13.2 in) 5 kg (12 lbs)
Maximum Size Part(s)	12.7 x 12.7 x 12.7 cm (5 x 5 x 5 in)
Volume Capacity (WaveWash)	3.78 L (1 gallon)
Power Requirements	Mojo 3D Printer: 100-127 VAC, 6A, 60 Hz or 220-240 VAC, 2.5A, 50 Hz WaveWash 55 Support Cleaning System: 100-120 VAC, 7A, 60 Hz or 220-240 VAC, 4A, 50 Hz
Regulatory Compliance	Mojo 3D Printer: CE / TUV / KCC / RoHS / WEEE WaveWash 55 Support Cleaning System: CE / TUV / RoHS / WEEE
Special Facility Requirements	Mojo 3D Printer: None WaveWash 55 Support Cleaning System: None

Mojo

Explore Other 3D Printers From Stratasys:

3D Printing Customer Stories

Customer Story: Avance Design

Step into Avance Design in Indianapolis, IN on any given day, and the whole team’s firing on all cylinders. Just speaking with Business Development Manager Bill Fletcher briefly, the array […]

Read Customer Story

Customer Story: WallX

Creative problem-solving is at the heart of what it means to be an entrepreneur. That’s what Greg Dempsey sought to do when he came up with WallX: solve a problem. […]

Read Customer Story

Customer Story: Frasca

Nobody said learning to fly was easy. Sure, birds, athletes, and superheroes make it look simple, but in reality, you have to take baby steps before you can really fly. […]

Read Customer Story