Stratasys V650 Flex – Stereolithography 3D Printer

Stereolithography. Upgraded.

Stratasys V650 Flex

Raise the Stereolithography 3D printing game.

Upgrade to the Stratasys V650 Flex 3D Stereolithography printer and you can add game-changing advances in speed, accuracy and reliability to the established capabilities of Stereolithography. Create smooth-surfaced prototypes, master patterns, large concept models and investment casting patterns more quickly and more precisely than ever. The result of over four years’ testing, the Stratasys V650 Flex delivers outputs unfailingly, time after time. More than 75,000 hours collective run time have gone into the V650 Flex, more than 150,000 parts produced in its refinement. It uses materials specially configured in partnership with DSM and it requires little maintenance.

V650 Video

Fine-tuned materials for outstanding results.

In partnership with DSM, Stratasys have configured, pre-qualified and fine-tuned a four-strong range of resins specifically to maximise the productivity, reliability and efficiency of the V650 Flex 3D printer. Create success with thermoplastic elastomers, polyethylene, polypropylene and ABS.

Somos® Element

Next-generation stereolithography resins, ideal for investment casting patterns.

Somos® NeXt

Stereolithography accuracy with the look, feel and performance of thermoplastic.

Somos® PerFORM

For applications needing strong, stiff, high-heat-resistant composites. Great detail resolution

Somos® Watershed XC 11122

A clear solution delivering ABS and PBT-like properties for stereolithography.

Stratasys V650 Flex Specs:

V650 Brochure

Footprint

Crated:
58 x 59 x 95 in. (211 x 140 x 244 cm), 2,200 lb (998 kg)
Uncrated:
55 x 50 x 87 in. (140 x 127 x 221 cm), 1,700 lb (771 kg)

Vat Capacity

Volume:
Half vat: 35 U.S. gal (132.5 L)
Full vat: 67 U.S. gal (253.6 L)

Build Envelope:
Half vat: 20 x 20 x 9.5 in. (508 x 508 x 203 mm)
Full vat: 20 x 20 x 23 in. (508 x 508 x 584 mm)

Laser

Type:
Q-switched harmonic diode pumped solid-state UV laser
Wavelength:
354.7 nm
Power @ 5000 hrs:
700 mW at source, at 100 kHz pulse rate

Optical And Scanning – X/Y Axis

Beam Diameter:
0.005 – 0.030 in. (127 – 762 μm)
Maximum Part Drawing Speed:
700 ips @ 0.030 in. (762 μm) beam size; 150 ips @ 0.005 in. (127 μm) beam size
X/Y resolution:
0.0005 in. (2,000 DPI)

Elevator And Recoating - Z Axis

Minimum Layer Thickness:
0.004 in. (100 μm)
Vertical Resolution:
0.0000625 in. (1.6 μm)
Position Repeatability:
0.0000625 in. (1.6 μm)
Maximum Part Weight:
120 lbs. (54.4 kg)

Full Technical Specifications Below

Download V650 Brochure

Features
Tech Spec Matrix

Reduced downtime, increased workflow.

The Stratasys V650 Flex prints through short power outages, and if you ever need to re-start, you can pick up exactly where you left off. Years of testing have helped deliver not only the stamina to run and run, but also low maintenance needs and high efficiency. To make life even easier, the V650 Flex runs on 110V power – no need to switch to a 220V power source.

More accuracy. More speed.

The V650 Flex’s adjustable beam spot sizes - 0.005” to 0.015” - enhance control, detail, smoothness and accuracy. With more precise printing comes better informed decision-making and better chances of success. You have twice the capacity and, to ease workflow further, this production-based machine provides a large VAT for maximum output (build volume 20”W x 20”D x 23”H) and interchangeable VATs.

Double capacity. Smaller footprint.

Readily combine a configurable environment with the power of a large-scale industrial size system to fine-tune materials and produce perfect outputs. You are also equipped with twice as many scanning systems, in a footprint smaller than the nearest competitor can offer. With the Stratasys V650 Flex, you can confidently upscale your thinking.

Innovative. Intuitive. Productive.

Every Stratasys V650 Flex is equipped with a user-friendly, touch-enabled interface developed in parallel with SolidView build preparation software. There are smart power controls and Adaptive Power Mode for automated adjustment of laser power, beam size and scan speeds for optimum build performance. Work with advanced efficiency.

Stratasys service and support.

Now Stereolithography comes with an invaluable component: peace of mind. The V650 Flex is backed by the end-to-end and on-demand service and world-class support that is guaranteed with Stratasys. Any field issues get fixed fast, and our 30 years’ experience in 3D printing enable us to help you do more than ever, more efficiently.

3D Printer Specifications

Laser

Type	Q-switched harmonic diode pumped solid-state UV laser
Wavelength	354.7 nm
Power @ 5000 hrs	700 mW at source, at 100 kHz pulse rate

Optical And Scanning – X/Y Axis

Beam Diameter¹	0.005 – 0.030 in. (127 – 762 μm)
Maximum Part Drawing Speed	700 ips @ 0.030 in. (762 μm) beam size; 150 ips @ 0.005 in. (127 μm) beam size
X/Y resolution	0.0005 in. (2,000 DPI)

Elevator And Recoating – Z Axis

Minimum Layer Thickness	0.004 in. (100 μm)
Vertical Resolution	0.0000625 in. (1.6 μm)
Position Repeatability	0.0000625 in. (1.6 μm)
Maximum Part Weight	120 lbs. (54.4 kg)

Vat Capacity

Volume	Half vat: 35 U.S. gal (132.5 L) Full vat: 67 U.S. gal (253.6 L)
Maximum Build Envelope	Half vat: 20 x 20 x 9.5 in. (508 x 508 x 203 mm) Full vat: 20 x 20 x 23 in. (508 x 508 x 584 mm)

Build Preparation

Software	SolidView/Pro RP Build
Software Requirement	Windows 7 Service Pack 1; Windows 10 recommended
Input Data File Format	STL, AMF, SLDPRT, PRT, IGES, IGS, STEP, STP, OBJ, PLY, WRL and more
Electrical Requirements	110 – 230 VAC, 50/60 Hz, single phase, 1000W

Ambient Temperature

Temperature Range	68 – 79 °F (20 – 26 °C ); laser chamber max = 83 °F (28.3 °C)
Maximum Change Rate	1.8 °F/hour (1 °C/hour)
Relative Humidity	10 – 50% non-condensing

Footprint

Crated Process Module	58 x 59 x 95 in. (211 x 140 x 244 cm)
Uncrated Process Module	55 x 50 x 87 in. (140 x 127 x 221 cm)

Weight

Crated Process Module²	2,200 lb (998 kg)
Uncrated Process Module²	1,700 lb (771 kg)

Miscellaneous

Options	Additional interchangeable vats, additional platforms
Warranty	1 Year, full coverage including laser

¹User-specified at installation.
² Weight does not include vat or resin.

3D Printing Customer Stories

Customer Story: Acer Technologies

The 3DEXPERIENCE platform from Dassault Systemes is a solution that CATI customer Acer Technologies seemed to have sought after since their inception. “When I started about 11 years ago, I […]

Read Customer Story

Customer Story: Goebel & Co. Furniture

Most people think of top-end, bespoke handcrafted furniture as in opposition to the quick work SOLIDWORKS makes of prototyping and design. For Martin Goebel, president and design director at Goebel […]

Read Customer Story

Customer Story: Classic Car Studio

Computer Aided Technology customer Classic Car Studio in St. Louis, Mo. started off as a traditional buy-and-sell classic cars operation when they opened their doors in 2006, but soon expanded into […]

Read Customer Story

Customer Story: Avance Design

Step into Avance Design in Indianapolis, IN on any given day, and the whole team’s firing on all cylinders. Just speaking with Business Development Manager Bill Fletcher briefly, the array […]

Read Customer Story