Windows Surface Pro 4: Will it Run SOLIDWORKS – Part 1: Unboxing and Technical Specs
This holiday season, I had the pleasure to play with one of the new Windows Surface Pro 4s and I was pretty impressed. But, will it run SOLIDWORKS? This is the question I plan on answering very soon here on the CATI Blog. But first, I thought we would go through standard unboxing and technical specs to see if there is anything either missing in the box or the Surface itself. In my opinion, the only thing that is really missing from the box is a keyboard cover.
The Technical Specs
Ok, so the model I have is the $999.00 model which comes with the following specs:
Processor: 2.4GHz Intel Core i5-6300U
Upfront thoughts: The i5 chip sets are not something that we have ever tested heavily here at CATI before, but the performance for 2.4 gigahertz process seems pretty solid
Display: 12.3" PixelSense with 2736 x 1824 pixels native resolution, 3:2 Aspect Ratio
Upfront thoughts: This display is crisp like no other. 2736 pixels across by 1824 pixels high is a very dense at almost 270 pixel per inch of display. With that said your Windows profile will load with the user interface being loaded at 300% scale just so you can see what you are doing. I reduced that to about 200%.
Ram: 4 Gig
Upfront thoughts: I usually start any machine with 8 or 16 of ram but that would increase this by 400 to 800 hundred dollars, ouch!
Graphics: Intel HD Graphics 520
Upfront thoughts: Not on the supported list from SOLIDWORKS, not if it will ever be, will not support realview graphics and things like Zebra strips and draft analysis may have problems. It has 24 EUs (Execution Units) running 1050 Mhz the graphics that is going to be have to rely on the system RAM due to no dedicated graphics RAM. The performance of this card varies a lot on other tests I've seen, being this an i5 with 4gig of RAM it's going to run slower. I'd give it a 5 out of 5 on the, "This is going to be the problem with this system running SOLIDWORKS.
Storage: Intel 128 SSD
Upfront thoughts: I'd like more but I'll take it
Ports: One USB 3 port, SD card reader, and headphone jack.
Upfront thoughts: You are going to want to buy a Logitech Unity Keyboard and Mouse because you only have one port. Unless you buy the keyboard cover which I suggest.
So next, we will run the thing through some paces and see how it performs.
Robert McGaughey, CSWE
Emerging Product Manager