Adrian Fanjoy and myself began doing performance testing for SOLIDWORKS four years ago. We have presented those results at SOLIDWORKS World each year as we have continued to refine our tests each year. This past year we partnered up with BOXX Technologies who lent us one of their top of the line CAD Workstations which allowed us to put together a large range of different test variables and produce our best set of results to date.
After all our testing and presentations were done this year BOXX and Intel asked us if we would work together with the team at Desktop Engineering to turn our Allowing SOLIDWORKS to Perform presentation into a white paper.
The white paper that we developed takes you through our entire process starting with the computer setup, to the large SOLIDWORKS assembly we used for testing. The paper then talks about the macro we built that takes our model and runs it through a battery of standard operations that a user of SOLIDWORKS would do in a "typical" work day. Next it takes you tests that we performed which were included everything from changes to the SOLIDWORKS System and Document Options to changes in the amount of RAM and type of hard drive that were installed in our computer. Our testing started with an initial baseline run of just over 5 hours with a setup that we see on most users computers. For each of our tests we isolated one item in our SOLIDWORKS or System environment then reran our macro to see how much of a performance difference that one change made. The paper concluded with our optimal system setup which shows the combination of changes that can increase your performance by as much as 5.5 times.
The link below will take you to the CATI site where you can download the Maximize SolidWorks' Performance White Paper.
Please check back to the CATI blog as we will continue posting our series of articles that goes further into the details of each of our tests. All of these articles will be stored in the category of Maximizing SOLIDWORKS Performance and links to each with their release date are listed below:
- Maximize SOLIDWORKS Performance White Paper (7/2/12)
- MSWP-12-#1 Introduction (7/9/12)
- MSWP-12-#2 Windows Visual and User Settings (7/12/12)
- MSWP-12-#3 SOLIDWORKS Options Set to Optimal (7/17/12)
- MSWP-12-#4 Graphics Cards (7/19/12)
- MSWP-12-#5 Turn Off SOLIDWORKS Add-Ins (7/24/12)
- MSWP-12-#6 Processor Clock Speed (7/26/12)
- MSWP-12-#7 Reducing SOLIDWORKS Mates and Rigid Subassemblies (7/31/12)
- MSWP-12-#8 Number of Processor Cores (8/2/12)
- MSWP-12-#9 SOLIDWORKS Graphic Settings (8/7/12)
- MSWP-12-#10 Network Storage and Anti-Virus (8/9/12)
- MSWP-12-#11 Level of Detail (8/14/12)
- MSWP-12-#12 RAM and SWAP File (8/16/12)
- MSWP-12-#13 Hard Drives (8/21/12)
- MSWP-12-#14 Lightweight and Large Assembly Mode (8/23/12)
- MSWP-12-#15 Optimal Configuration and Conclusion (8/28/12)
Josh Altergott, CATI Support Manager
Adrian Fanjoy, CATI Technical Services Director