CATI Tech Notes

SOLIDWORKS Tips and Tricks and Info on Professional 3D Printing with Stratasys from the Technical staff of CATI

Free SolidWorks from Performance Constraints (FSWPC-13-#16)

(Modeling Methodology – Envelope)

The next tool that we are going to look at for reducing the level of detail in our parts and subassemblies is Envelope. Both parts and assemblies can be set as an Envelope when inserted into and assembly or it can be set in the component properties. Envelopes have two main functions, can use them as a reference component or as a selection tool. Envelopes are ignored in global assembly operations such as bills of materials and mass properties.

SolidWorks

For our assembly once again due to the overall size we choose to use Envelope on just the Cab Assembly.

SolidWorks

You can by looking at our deltas see that on our Practical machine we gained 0.4% total improvement. If we look at the Typical machine we can see that the overall improvement is cut by a respectably 36% performance gain and took over 1hour and 42min off of our benchmark time.

Please
check back to the CATI blog as we will continue posting our
series of articles that goes further into the details of each of our tests. All
of these articles will be stored in the category of Free SolidWorks from Performance
Constraints
 and links to each with their
release date are listed below:

Thanks,

Josh
Altergott, CATI Support Manager

Adrian
Fanjoy, CATI Technical Services Director

 

 

Posted in Free SolidWorks from Performance Constraints

Leave a Reply

Connect With Us

Categories

Archives

SOLIDWORKS Keyboard Shortcuts Cheat Sheet

SolidWorks Shortcuts