Routine Maintenance Schedule On A Stratasys PolyJet Desktop Printers

EmailFacebookGoogle+LinkedInTwitterShare

Routine Maintenance Schedule On A Stratasys PolyJet Desktop Printers

After every print job:

Clean the print heads and the roller surface. see “Cleaning the Print  heads and the Roller”

Weekly:

Perform the Pattern test. See “Pattern Test”

Stratasys 3D Printing: Objet Pattern Test

Clean and inspect the wiper. See “Cleaning and Replacing the Wiper”

Wiper Cleaning, Inspection, and Replacement on a PolyJet Desktop Printer – Stratasys 3D Printer Support Tip

When printing with MED610 Calibrate the UV intensity. See “Testing and Calibrating the UV Lamp”

Stratasys 3D Printing: UV Lamp Replacement/Calibration

Weekly: Restart the printer computer and the  server computer.

Every 300 hours of printing: (A reminder message appears.)

Calibrate the UV intensity. See “Testing and Calibrating the UV Lamp” above

Optimize the print head Check the alignment of the print heads. See “Aligning the Print Heads”

Stratasys 3D Printers: Print Head Alignment for PolyJet Desktop Printers

Every 500 hours of printing/every six months:

Calibrate the load cells. See “Calibrating the Load Cells”

How to Calibrate Your Load Cells on a PolyJet Desktop 3D Printer – Stratasys 3D Printer Support Tip

 

Dave Murawski

Computer Aided Technology