COSMOS Network License (with SOLIDWORKS standalone license) – Setting up Host ID-based licensing

EmailFacebookLinkedInTwitterShare

Users Often Get Confused about using COSMOS network seats with SOLIDWORKS stand alone licenses. This is not an uncommon scenario as companies want to save money and share the same COSMOS seat amongst multiple users. Here is a low down on what needs to be done. Instructions to use COSMOS 2008 with a SolidNetWork License (SNL) file: 1. Save and unzip the SNL_AllowMultHostIDs.zip to any location on the server. (call CATI 888-285-2284 or email us support@cati.com)2. Clicks on the Registry […]

Read More

Finding THAT Needle in a Haystack!!

EmailFacebookLinkedInTwitterShare

I was reading the SOLIDWORKS Community online journal when I came across an interesting passage that underscored the need for an integrated data management solution to keep track of analysis results. http://www.solidworkscommunity.com/feature_full.php?cpfeatureid=26119 At a time where huge amounts of data circulate through computers and servers, it is almost way too easy to misplace information. Haystacks of information are growing ever larger and the needles ever smaller!! It is a routine procedure in a battery of analysis tests to make numerous […]

Read More

Planning for Finite Element Analysis – Part II of IV

EmailFacebookLinkedInTwitterShare

GATHERING PERTINENT DATA Based on the industry, each customer has stringent requirements that are to be met by either the design, or the Finite Element Analysis results, or both. For example, a customer A can have a requirement that states that the factor of safety of the design should be at least 2, and that the maximum deflection on the design should not exceed 0.10 inches upon full-load application. Customer B might require the design to be within a certain […]

Read More

Planning for Finite Element Analysis – Part I of IV

EmailFacebookLinkedInTwitterShare

With the integration that is available today between CAD and FEA, it is not uncommon to take model setup for granted, and put out fires at the end if there are conflicting results. For a seasoned FEA user, this approach works effectively enough. However, a little planning ahead can go a long way in ensuring correct results. Analysis is a lot like tightrope walking. One misstep in the setup can cause results to look disastrous. However, if setup correctly, the […]

Read More

INTRODUCTION TO COSMOS

EmailFacebookLinkedInTwitterShare

COSMOS is the FEA tool built to function right inside your SOLIDWORKS interface. It is intended to empower both specialists and designers/engineers with capabilities to analyze their designs in an easy and resourceful way, and understand the results with its extremely user-friendly post-processing features. Its efficient integration with SOLIDWORKS makes it all the more versatile. In-built features such as using design scenarios for What if scenarios and easy re-analysis of design changes makes the tool technically sound. The breadth of […]

Read More

What’s New in SOLIDWORKS 2008

EmailFacebookLinkedInTwitterShare

We’d like to thank many of you who attended one of our local “What’s New in SOLIDWORKS 2008” events. It was good to see friendly faces from training classes that I hadn’t seen in a while. It was also good to hear that business is growing for many of you. A few of you asked if the presentations could be made available to you. Many of you did not get to attend, but would like to flip through the presentations. […]

Read More