Prepping Your Objet Desktop for Move

Prepping your Objet Desktop for move

When moving your objet desktop to another location please follow these steps to ensure that nothing will be damaged.

The first thing you need to do is empty the machine of build material and fill it with cleaning fluid.

You will find the Flush/Fill wizard under Options- Wizards.

After the cleaning solution is loaded, power down the printer. Then  lower the build tray by using a flat blade screwdriver on the lead screw located in front of the tray

Next, install the foam block that came with the printer

Then slide the print block over the block and raise the tray up until it is tight.

Lastly, install the drawer bracket that also come with your machine.  This will prevent the tray from opening during transportation. If you can not locate the bracket you can use packing tape.