Routine Maintenance Schedule On A Stratasys PolyJet Desktop Printers
Routine Maintenance Schedule On A Stratasys PolyJet Desktop Printers
After every print job:
Clean the print heads and the roller surface. see “Cleaning the Print heads and the Roller”
Weekly:
Perform the Pattern test. See “Pattern Test”
https://www.cati.com/blog/2017/02/objet-pattern-test/
Clean and inspect the wiper. See “Cleaning and Replacing the Wiper”
https://www.cati.com/blog/2014/09/wiper-cleaning-and-replacement/
When printing with MED610 Calibrate the UV intensity. See “Testing and Calibrating the UV Lamp”
https://www.cati.com/blog/2016/10/uv-lamp-replacementcalibration/
Weekly: Restart the printer computer and the server computer.
Every 300 hours of printing: (A reminder message appears.)
Calibrate the UV intensity. See “Testing and Calibrating the UV Lamp” above
Optimize the print head Check the alignment of the print heads. See “Aligning the Print Heads”
https://www.cati.com/blog/2016/12/print-head-alignment-for-polyjet-desktop-printers/
Every 500 hours of printing/every six months:
Calibrate the load cells. See “Calibrating the Load Cells”
https://www.cati.com/blog/2014/11/load-cell-calibration/
Dave Murawski
Computer Aided Technology