SOLIDWORKS: How to Use Design Tables for Assemblies

EmailFacebookLinkedInTwitterShare

Utilizing Design Tables is very handy and certainly saves time with designing as well as modifying. While using Design Tables to assist with the creation of multiple Configurations at the Part Level is common, what about at the Assembly Level? Currently, the same technique doesn’t apply but there is a way in which we can still accomplish this task. Here is a simple Assembly in which we intend for a Design Table to create a few additional Configurations. In each […]

Read More

SOLIDWORKS: Make Part Flexible – How to Modify Components to Allow Flexibility

EmailFacebookLinkedInTwitterShare

Flexible Components, first introduced in SOLIDWORKS 2020, allow the assembly geometry to simultaneously drive the geometry of a flexible part. This is very advantageous for situations that require a part to dynamically interact with its surroundings, like a compression spring or even a boot for a shifting mechanism. The ‘Make Part Flexible’ command allows the flexible component to automatically update its position within the assembly without the need to rebuild the assembly each time. Let’s turn our attention to a […]

Read More

SOLIDWORKS – Creating Internal Volume – Combine (Subtract)

EmailFacebookLinkedInTwitterShare

Previously there have been a few CATI blogs written regarding the process of finding the internal volume of a part. Such methods include the commonly known Intersect command to achieve this task as well as the Delete Face command. This blog will touch on one more approach to that end goal which might prove useful to your circumstance. An alternative approach to identifying the internal volume of a part in SOLIDWORKS is by use of the Combine feature, specifically Combine […]

Read More

SOLIDWORKS 2021 What’s New – New Mate UI (tabs) & Defaults for Slot Mate Options

EmailFacebookLinkedInTwitterShare

SOLIDWORKS performs a ‘clean-up’ with respect to the Assembly Mates Property Manager for 2021. Prior to the New Release, the Property Manager consisted of several expandable groupings for each Mate Type as well as other Mate Options. A single click of the downward facing arrow to the right of each Mate Type would activate options for Standard, Advanced, or Mechanical Mates. While Expanding one of these selections would automatically collapse another, i.e. only one viewable Mate Type at a time, […]

Read More

SOLIDWORKS: Design Intentionally with Non-Analytic Geometry

EmailFacebookLinkedInTwitterShare

There are many ways to accomplish a desired outcome when designing with SOLIDWORKS. Be that as it may, Design Intent is just that; Intentional. In order for us to reach our end goal as efficiently as possible, we must be intentional with our chosen process. While simple extrudes or cuts may be less cumbersome to mentally map out, non-analytic geometry, commonly achieved by Sweeps, can be a loftier goal. Speaking of Lofts, in this blog, I’ll use a rather specific […]

Read More

Is Your Borrowed SOLIDWORKS License Freezing?

EmailFacebookLinkedInTwitterShare

A freezing issue like no other. When borrowing a network license to work remotely, some users have reported a specific performance issue during their SOLIDWORKS sessions that can slow productivity. In this particular scenario, it is stated that every so often, the session will freeze for about 10-15 seconds regardless of features, commands, or specific clicks. Testing the waters for a recent support issue, an early suggestion was disconnecting the internet altogether to discover that the freezing had stopped. Drawing […]

Read More

SOLIDWORKS: Troubleshooting Scaling Issues (Large Icons/Text)

EmailFacebookLinkedInTwitterShare

SOLIDWORKS is highly customizable, but “why are my ‘already’ small icons suddenly larger than normal?” Well, laptops often have smaller screens than our second monitors; after all, aren’t we all using dual monitors with SOLIDWORKS? If you’re now working from home and notice a difference from your work setup, here’s how to properly scale things back to normal.   Multi-sized dual monitor setups aren’t ideal. On Windows 10, Microsoft does a great job formatting the two, but we need SOLIDWORKS […]

Read More