Stratasys 3D Printing: Introducing the NEW Stratasys F123 Series 3D Printers

EmailFacebookLinkedInTwitterShare

Introducing the NEW Stratasys F123 Series 3D Printers   The Stratasys F123 Series 3D Printers make rapid prototyping more efficient and productive. These 3D printers were designed to remove the barriers designers and engineers face by making the RP process more efficient and productive. The Stratasys F123 Series addresses typical rapid prototyping pain points and lets companies create better products faster, reducing the time to market.     The hallmark of the Stratasys F123 3D Printer Series is that it […]

Read More

St. Louis 3D Printing and 3D Scanning Workshop

EmailFacebookLinkedInTwitterShare

CATI and TechShop St. Louis would like you to be our guest at our 3D Printing and 3D Scanning Seminar in St. Louis on March 9th.  There is no cost to attend and lunch is included. This event features brand new content as well as a live demonstration of 3D Scanning, 3D Printed Tooling for Injection Molding, and 3D Printed Tooling for Thermoforming. Seating is limited, so be sure to register early to reserve your spot. Event Information: When March 9, 2017 9:30am – […]

Read More

Stratasys 3D Printing Roadshow/Meet & Greet Event – Schaumburg, IL February 8th

EmailFacebookLinkedInTwitterShare

Roadshow/Meet & Greet Event – Schaumburg, IL February 8th   Join CATI and Stratasys at our Stratasys 3D Printing Roadshow/Meet & Greet Event in Schaumburg, IL on February 8th. There is no cost to attend and breakfast is included. Seating is limited, so be sure to register early to guarantee your spot.   This event features brand new content as well as two very special guest speakers:   Tom Brosseau, Senior Industrial Designer at The Marketing Store Worldwide David Vogel, Designer and Principal […]

Read More

Stratasys 3D Printing: Product Innovation With The Stratasys J750

EmailFacebookLinkedInTwitterShare

Product Innovation With The Stratasys J750   When a new mobile device hits the market, new accessories, such as chargers and cases immediately follow. OtterBox, the #1 most trusted brand in smartphone and tablet cases, has a goal getting new products on the shelf the same day of a device launch. OtterBox keeps pace with the dynamic consumer electronic industry by using full color, multi-material 3D printing throughout its product development process.   Watch this pre-recorded webinar to spend a day in […]

Read More

Creaform 3D Scanning: PLM Process

EmailFacebookLinkedInTwitterShare

3D Scanning in the PLM Process Information in this article was originally published by Creaform in the eBook, An Introduction to 3D Scanning. 3D scanning has emerged as a critical tool in every step of the product lifecycle management (PLM) process. This is especially true of the new generation of truly portable, self-positioning scanners. The ability of 3D Scanners to bridge the gap between physical objects in the real world and the digital de-sign environment has become extremely valuable in a […]

Read More

3D Scanning: How it Works

EmailFacebookLinkedInTwitterShare

How 3D Scanning Works Information in this article was originally published in the Creaform eBook, An Introduction to 3D Scanning. 3D scanners are tri-dimensional measurement devices used to capture real-world objects or environments so that they can be remodeled or analyzed in the digital world. The latest generation of 3D scanners do not require contact with the physical object being captured. 3D scanners can be used to get complete or partial 3D measurements of any physical object. Most these devices […]

Read More

3D Scanning: An Introduction to Creaform

EmailFacebookLinkedInTwitterShare

An Introduction to Creaform 3D Scanning While the mainstream media continues its obsession with 3D printing, another impactful, disruption is revolutionizing the way products are designed, engineered, manufactured, inspected, and archived. It’s 3D scanning — the act of capturing data from objects in the real world and bringing them into the digital pipeline. CATI has partnered with Creaform to enhance your product development process with 3D Scanning technology. So, what is 3D Scanning?  This eBook will get you started and provide an […]

Read More

SOLIDWORKS 2017 WHAT’S NEW: Design Innovation Summit Sponsor Highlight– SOLIDWORKS  – #SW2017

EmailFacebookLinkedInTwitterShare

Thank you to SOLIDWORKS for sponsoring our SOLIDWORKS 2017 Launch Events (the Design Innovation Summit). With more core power and performance, and new capabilities for emerging technologies, it’s never been easier to design and create with SOLIDWORKS, the design and development solution chosen by more than 3.1 million users worldwide. Here is a sampling of the new key features to help improve your workflow. Be sure to take a look at the rest of our What’s New in SOLIDWORKS 2017 […]

Read More

SOLIDWORKS 2017 WHAT’S NEW: Design Innovation Summit Sponsor Highlight– BOXX Technologies – #SW2017

EmailFacebookLinkedInTwitterShare

Thank you to BOXX Technologies for sponsoring our SOLIDWORKS 2017 Launch Events (the Design Innovation Summit). BOXX Technologies manufactures workstations and rendering systems for a variety of industries and business uses including engineering, product design, and simulation. The BOXX product lines are some of the fastest workstations designed for CAD and Engineering Applications – including SOLIDWORKS. Watch these videos for a closer look at BOXX Workstations and SOLIDWORKS 2017. Please check back to the CATI Blog as the CATI and MCAD Support Teams […]

Read More

SOLIDWORKS 2017 What’s New: Design Innovation Summit Sponsor Highlight – #SW2017

EmailFacebookLinkedInTwitterShare

Design Innovation Summit Sponsor Highlight   With our Design Innovation Summit events kicking off throughout the country next week, we would like to take a moment and thank our partners who help make these events possible. Be sure to visit the Productivity Zone at a Design Innovation Summit Event near you to learn more about the great solutions from these companies.       Please check back to the CATI Blog as the CATI and MCAD Support Teams will continue to break […]

Read More