Objet Head Filling calibration and Error Trouble Shooting

EmailFacebookGoogle+LinkedInTwitterShare

Your Objet Desktop can display an error related to heads filling while it is printing. This can be due to numerous thing but most commonly they are from the machine being out of calibration.First thing that should be done is to make sure your load cells are in calibration and try to print again. If the error repeats then move on to doing the heads filling calibration. For more information on the load cell calibration you can access it from […]

Read More

Setting up a Host Machine for an Objet Printer

EmailFacebookGoogle+LinkedInTwitterShare

When setting up a host machine for an Objet printer, there are some specific things that need to be considered. I will go through all the steps that need to be taken in order to get your printer up and running. You must have the printer connected to the host machine via crossover cable (orange cable that comes with the machine). It is advised that you use a dedicated network interface card for the printer. It is ok to connect […]

Read More