build trays

F123 Series Build Tray Guide

EmailFacebookLinkedInTwitterShare

Substrates for the Stratasys F123 Series are like those used with Mojo systems and are made of the same grade ABS. One substrate is used for all model materials. Substrates are sized according to the system model number. It’s recommended to populate trays from front to back since the hot air flows from both sides. Be sure to remove all materials before reusing trays by forcefully flexing the substrate using multiple angles. Bend the tray over a large solid/stationary object […]

Read More

Stratasys 3D Printing: FDM Printer Head Jams – A Simple Solution

EmailFacebookLinkedInTwitterShare

FDM Printer Head Jams – A Simple Solution If your FDM head is frequently jamming there may be a simple solution. This can only be done on the Stratasys uPrint, Dimension 1200 and Fortus 250mc systems. Over time, the Z axis will become uncalibrated.  This can happen by itself over time or be caused by reusing build trays.  The Solution is to run a Z calibration.  This will insure that the tips are printing at the proper height away from […]

Read More