Stratasys F123 Series Tip Wipe Assemblies

EmailFacebookLinkedInTwitterShare

It is important to keep the tip wipe assemblies in your Stratasys F Series printer working properly. If the tip wipe assemblies are not cleaning the tips properly, bad print results can occur. The tip wipe assemblies should be checked and cleaned on a monthly basis or anytime you are having print quality issues that may be related to a print head. You should also check the tip wipe assembly any time you notice that material stays stuck to the […]

Read More

F123 Firmware Update & GrabCad Software Updates 1.11-1.14

EmailFacebookLinkedInTwitterShare

Released 2/1/18, back end software version 1.5.5420 for the F123 printers changes are as follows; Added oven stabilization time before build to prevent thermal shifting of the part when starting from a cool oven. Duration of stabilization is dependent on recent temperature history of the oven. When coming from room temperature, stabilization time will be 75 minutes. When coming from heated idle, stabilization time is closer to 5 minutes. To minimize stabilization time, run machine in Quick Start mode, found […]

Read More

Stratasys 3D Printing: F123 Series Camera Shroud Print and Install

EmailFacebookLinkedInTwitterShare

F123 Series Camera Shroud Print and Install   If you have a F123 series machine and use the camera to view your builds through Grabcad Print software or the mobile app, you will notice in rooms with a fair amount of ambient light that there is a reflection. This stems from the double pane window and the camera being between them.   Stratasys has released a customer level fix for this issue and below are how you go about doing […]

Read More