GrabCAD Print Version 1.35 Released

EmailFacebookLinkedInTwitterShare

Build number 1.35.21.56592 released on 24 October 2019 Important Notification: Support for Windows 7 is ending. After January 14, 2020, Microsoft will no longer provide security updates or support for PCs running Windows 7. GrabCAD Print 1.37 (scheduled for December 17, 2019) will be the final release supported on Windows 7. Stratasys will stop providing software updates for GrabCAD Print on Windows 7, will no longer ensure that GrabCAD Print works on Windows 7, and will not offer support for […]

Read More

GrabCAD Print Version 1.33 Released

EmailFacebookLinkedInTwitterShare

GrabCAD Print Build number 1.33.10.54793 released on 20 August 2019 FDM Changes/Improvements: On printers that are supported by Advanced FDM, some advanced features are now available in the Model Settings tab. These include infill density, infill angle, and body thickness, and when CAD files are used, the ability to change a cylindrical hole into a self-supporting diamond. The Advanced FDM mode, introduced in version 1.24,  is now supported on the Stratasys F170, F270, F370, all Fortus (250, 380, 400, 450, […]

Read More

Advance FDM Mode Lesson 2: General Tour (Part 4 of 4)

EmailFacebookLinkedInTwitterShare

Welcome to the final part of our General tour of GrabCAD Print – Advance FDM Mode. In part 4 we will dive into the Slice preview and touch on the Manufacturing notes, If you are following along from lesson 2 part 3 then you will just need to open the Slice Preview menu. If you are just joining again after a long a good night’s rests from playing with all the Selection settings, then be sure to open your edited […]

Read More

GrabCAD Toolpaths vs. GrabCAD Advance FDM Mode Toolpaths Part 1 of 2

EmailFacebookLinkedInTwitterShare

Toolpaths are the machine’s movements that build the parts we want, either in subtractive or additive technologies. One of the key differences between additive and subtractive methods is the porosity of the created part. Porosity is the number of voids by volume in any material. Most if not all subtractive processes (while using the same 3D printable materials like ASA/ABS) will result in non-porous parts. However, due to the FDM nature of additive technology, the parts created will be porous. […]

Read More

Advance FDM Mode Lesson 2: General Tour (Part 3 of 4)

EmailFacebookLinkedInTwitterShare

Welcome to the third part of our step-by-step walkthrough of the “General Tour of GrabCAD Advance FDM Mode” series. In this section, we will dive into the core that makes up GrabCAD – Advance FDM Mode. Let’s dive right into the powerful Selection Menu and it’s sub tabs of Body and Face. Starting with a blitz through “how to get there” Launch GrabCAD Once on the landing page, be sure to click on the 4th Icon to get into the […]

Read More

Advance FDM Mode Lesson 2: General Tour (Part 2 of 4)

EmailFacebookLinkedInTwitterShare

Welcome back to the General Tour of Advance FDM Mode Part 2. After reviewing the menus, learning to add models, and learning about the selection of bodies in Advance FDM Mode: General Tour Part 1. Moving forward with our General Tour, our next steps are exploring the Print Settings menu and understanding how the Orientation menu works. Let’s get started. Please Launch GrabCAD and proceed to the 4th icon, Advance FDM Mode Tab. But if there are only 3 icons refer […]

Read More

Using the CMB file format with GrabCAD Print – Part 2

EmailFacebookLinkedInTwitterShare

Part 2 of 2 – Importing a CMB File Stratasys FDM (Fused Deposition Modeling) technology utilizes a CMB (Coordinate Machine Binary) file format as the code to drive its equipment. CMB files are typically created with the advanced Insight software for F370 and Fortus level machines, but GrabCAD Print can also export and import a CMB file. In Part 1 we discussed how, when and why to export a CMB file from GrabCAD Print. In this blog, we will focus […]

Read More

Using the CMB file format with GrabCAD Print – Part 1

EmailFacebookLinkedInTwitterShare

Part 1 of 2 – Exporting a CMB File Stratasys FDM (Fused Deposition Modeling) technology utilizes a CMB (Coordinate Machine Binary) file format as the code to drive its equipment. CMB files are typically created with the advanced Insight software for F370 and Fortus level machines, but GrabCAD Print can also export and import a CMB file. Read on to learn more about how, when and why to export or import a CMB file with GrabCAD Print. The simplicity of […]

Read More

Advance FDM Mode Lesson 2: General Tour (Part 1 of 4)

EmailFacebookLinkedInTwitterShare

Welcome to Advance FDM Mode: General Tour Part 1, this is a continuation of the Getting Started with GrabCAD – Advance FDM Mode. This part will go through the general menus, then dive into add models menus.  To start off this step by step deep dive is a look at the menus of Advance FDM mode. Note: If your home screen has 3 icons, go back to Getting Started with GrabCAD – Advance FDM Mode Click the Advance FDM Mode Tab on […]

Read More

Setting Preferences and Customizing Stratasys Insight Software

EmailFacebookLinkedInTwitterShare

The advanced Stratasys Insight software is available on all F370 and Fortus machines.  Within the Insight software, there is a wide array of options and customizations that can be unleashed.  Insight software can be a stand-alone installation or launched within GrabCAD Print. In GrabCAD Print choosing the Apps on the main menu bar and selecting Launch Insight (shown right) will launch the latest version of Insight (you must have an Internet connection for Insight to launch). For a comparison of […]

Read More