Calibrating your GO!SCAN 3D Scanner

EmailFacebookLinkedInTwitterShare

Due to the inevitable changing of environmental conditions, it is important to be able to optimize data acquisition by running a quick scanning calibration. It is not necessary to do before every scan, but calibration should be done on a regular basis and when the scanner is exposed to an obviously different environment than the last time it was calibrated. The GO!SCAN system is supplied with a calibrated and serialized reference artifact, also known as a calibration plate. This is […]

Read More

Un-Boxing Your HandyScan 700

EmailFacebookLinkedInTwitterShare

  Getting your HandyScan 700 set up and ready to scan is a quick and easy process. This blog will highlight some of the key steps that you don’t want to miss. First step in unboxing your HandyScan 700 is going to be making sure all of the contents are there. Using the slots on the side of the foam, lift the foam and contents up enough to check for looks like a flat wood box. With all the necessary […]

Read More

Stratasys 3D Printing: Accuracy of Stratasys FDM vs. Hobbiest FDM Machines

EmailFacebookLinkedInTwitterShare

Accuracy of Stratasys FDM vs. Hobbiest FDM Machines   What is the actual difference between Stratasys FDM machines and hobbiest FDM Printers?   There are so many FDM machines out there on the market today that utilize FDM technology and it can be hard to distinguish between them. Parts off one machine can look just as good as parts off a different one. But one of the main things to take into consideration is Reliability and Repeatability. If you are […]

Read More