SOLIDWORKS 2021 What’s New – SOLIDWORKS Plastics Tutorial Validating Injection Molding Process

EmailFacebookLinkedInTwitterShare

A question that my colleagues and I are often asked is ‘how accurate are the results from <insert simulation product name here>?’.  You might think that is an easy answer.  In some instances, it absolutely is.  To me, the better question is ‘if I set up my study/project correctly, can I trust the results’.  That gets to the heart of the matter when it comes to analysis.  If we are going to design better products by utilizing analysis tools, the […]

Read More

SOLIDWORKS 2021 What’s New – SOLIDWORKS Plastics Multi-Material Overmolding Enhancements

EmailFacebookLinkedInTwitterShare

SOLIDWORKS 2021 brings many changes and enhancements to our injection molding analysis work.  I recommend you start with a blog written by my colleague, Drew Buchanan, SOLIDWORKS Plastics – Redesigned PlasticsManager Tree.  Like the SOLIDWORKS Plastics user interface, the process for performing multi-material injection overmolding has been revamped in SOLIDWORKS Plastics 2021.  Let’s take a look at comparing the old and the new process for setting up a multi-material overmolding SOLIDWORKS Plastics study. Multi-material overmolding analysis requires a license of […]

Read More

How Do I Post Process a SOLIDWORKS Plastics Shell Meshed Study

EmailFacebookLinkedInTwitterShare

How do I post process a SOLIDWORKS Plastics shell mesh study?  Utilizing the analysis capabilities of SOLIDWORKS Plastics early in the product development cycle enables users to optimize the plastic injection molding process, create high quality parts, and reduce manufacturing costs.  Now that the study has been solved, what’s next?  Clean up the SOLIDWORKS graphics window?  Gather data for inlet pressure or clamp force?  Create animations?  There are many post processing options for a shell meshed, SOLIDWORKS Plastics study.  Here […]

Read More

SOLIDWORKS 2020 What’s New – Geometry-Based Boundary Conditions

EmailFacebookLinkedInTwitterShare

What do you get when you take something that was good and make it even better?  In this case, you get SOLIDWORKS Plastics 2020!  A year ago, SOLIDWORKS Plastics first introduced Geometry Based Boundary Conditions for injection locations, control valves, and mold wall temperatures.  This began to shift dependency away from the SOLIDWORKS Plastics mesh towards the CAD model geometry.  For those of you familiar with SOLIDWORKS Simulation and SOLIDWORKS Flow Simulation, this is the same mode of operation as […]

Read More