SOLIDWORKS SOLIDPractices Documents Now Available

EmailFacebookLinkedInTwitterShare

Everyone who uses SOLIDWORKS wants to know that they are modeling in the best manner to get the best performance out of their system. We are constantly asked what are the best practices that we should be following. This can be a very loaded question because there are so many moving components that often come into play for each company. The best practices for one company may not always be the best practices for another company. With that being said, […]

Read More

Stratasys 3D Printing: Objet Pattern Test

EmailFacebookLinkedInTwitterShare

Objet Pattern Test   The Polyjet rapid prototyping machines are Stratasys’ highest accuracy and highest detail machines. To keep the accuracy and reliability of these machines so high, we will have to do some preventative maintenance checks and calibrations on them occasionally. One of these tests is the ‘pattern test.’   The pattern test is quick, less than 5 minutes, preventative maintenance check that is recommended to be performed about once a week, or before a really large build. The […]

Read More

X, Y, & Z Calibration for your Uprint, 1200, and Fortus 250mc Printers

EmailFacebookLinkedInTwitterShare

On your FDM system you can run a number of different materials and/or colors through it. Over time the tips deteriorate and need replacing. Some colors such as blue and orange tend to leave trails of the material in the tip as well that can come out even after purging and will be embedded into your other color parts. For instances like this we recommend keeping spare tips for these colors so they don’t ruin a part after you do […]

Read More