Stratasys 3D Printing: Manual / Alternative Load Cell Calibration

EmailFacebookLinkedInTwitterShare

Manual / Alternative Load Cell Calibration   In some cases, the Stratasys Polyjet desktop models will require a manual load cell calibration.  In the case where the load cell calibration wizard does not correctly, calibrate the weight using this method:   First off, remove all bottles and waste containers from the material bay.   In the printer application, select Maintenance > Calibration.     Select the Weight Sensor tab.  From the Cartridge list, select the weight sensor you want to […]

Read More

New Heads Filling Wizard Method

EmailFacebookLinkedInTwitterShare

We have found that when doing a heads filling calibration there are extra steps that should be taken to ensure an accurate calibration. Manually changing the liquid level sensors back to factory values will help the machine calibrate the sensors accurately.  Do do this extra step simply enter maintenance mode then go under the Parameter Manager. Scroll down to Heads Filling. Then change the first four values to look like the values below. Then follow the normal Heads filling calibration […]

Read More

3D Printing Materials: FDM and Polyjet

EmailFacebookLinkedInTwitterShare

Early this week I was at the CATI Product Development forum held at the NIU Rockford, IL campus. We had a great attendee turnout for this event. I conducted a presentation on materials for FDM and Polyjet and applications where there could be a crossover using either both or separate technologies. I thought I would provide some slides from this presentation along with commentary. I start my presentation by stating additive manufacturing technologies have been around for some time now […]

Read More